Food-Grade Pouches and POF Shrink Film for Beverage Lines
FDA 21 CFR 177.1520 food-contact bags and five-layer POF shrink film with ≥50% shrink rate for high-speed lines. ISO 9001 plant, 7–15 day lead time.
Food-grade flexible packaging must meet migration limits for direct food contact and run cleanly on high-speed filling lines. PSF Packaging supplies PE, PP and mPE bags compliant with FDA 21 CFR 177.1520 and five-layer co-extruded POF shrink film with a shrink rate of ≥50% for high-speed lines, from a 3,000 m² plant with 7–15 day lead times.
Scope of supply in this sector
We supply food-contact bags, printed food pouches and POF shrink film for beverage and food lines. We do not manufacture food, and we do not issue legal food-contact certification for your finished product — we supply material compliance to FDA 21 CFR 177.1520 for olefins. Retort, high-oil and high-acid applications need separate evaluation; tell us the contents and fill temperature before we specify a film.
Requirements
| Food-contact compliance | FDA 21 CFR 177.1520 (olefin polymers) |
|---|---|
| Shrink rate | ≥50% for five-layer co-extruded POF |
| Film structure | Five-layer co-extrusion |
| Print resolution | Offset and gravure up to 150 LPI |
| Quality system | ISO 9001 (certified 2019) |
| Standard lead time | 7–15 days |
Materials we supply for this sector
- PE / mPE food-contact grade
- PP / OPP / CPE / PO
- Five-layer co-extruded POF shrink film
- PLA biodegradable film where compostability is required
Applicable standards
- FDA 21 CFR 177.1520 for olefin food-contact polymers
- ISO 9001 (certified 2019)
- EU REACH compliant (2022)
- Offset and gravure printing up to 150 LPI
Typical bag formats and applications
- Beverage multipack and bundle shrink film
- Food-grade flat and stand-up pouches
- Printed retail food bags
- mPE / PE food-contact liners
Quality risks specific to this sector
These are the failure modes we see most often in this sector. They are listed because knowing them before sample approval is cheaper than discovering them at your incoming check.
- Migration: non-food-grade resin or inappropriate ink can migrate into food; only FDA 21 CFR 177.1520 grades are used for direct contact.
- Shrink wrinkles: film with less than the required ≥50% shrink, or mismatched tunnel temperature and airflow, leaves loose collars and wrinkles on high-speed lines.
- Ink rub-off: poorly cured ink transfers during transport and handling; 150 LPI print must be fully cured before converting.
- Seal contamination: product residue on the seal area causes leakers and rejects on the filler.
Compliance and capability questions
What does FDA 21 CFR 177.1520 cover?
It is the US food-contact regulation for olefin polymers such as PE and PP. PSF uses compliant olefin grades for direct food contact; it does not cover every food type, so retort, high-oil or high-acid contents need separate evaluation.
Why use five-layer POF shrink film on a high-speed line?
Five-layer co-extrusion gives a controlled shrink rate of ≥50% and consistent sealing, which keeps multipacks tight at high line speeds. A lower or uneven shrink rate shows up as loose film and wrinkles.
Can you print full-colour graphics on food bags?
Yes. Offset and gravure printing runs up to 150 LPI with food-contact-appropriate inks. Send the artwork and contents; we will confirm the ink system and cure before production. Lead time is 7–15 days.
Industries we also supply
Electronics & Semiconductor
ESD shielding packaging is a static-dissipative barrier that protects electronic components from electrostatic discharge and moisture during storage and shipment. PSF Packaging supplies ESD shielding bags with surface resistance of 10⁶–10¹¹ Ω, moisture-barrier and anti-oxidation pouches for PCBs and semiconductors, from a 3,000 m² ISO 9001 plant with 7–15 day lead times..
View sectorAutomotive & Mechanical Parts
VCI rust-preventive packaging releases vapour-phase corrosion inhibitors from the film to protect bare metal surfaces without coating parts in oil. PSF Packaging supplies VCI bags that replace traditional rust-preventive oil for automotive and mechanical parts, from a 3,000 m² ISO 9001 plant with 7–15 day lead times and a 99.9%+ passed-inspection rate..
View sectorE-commerce, Retail & Jewellery
E-commerce and retail packaging balances shelf presentation with transit protection across many SKUs. PSF Packaging supplies custom printed bags, self-seal zipper pouches, OPP card-header bags and bubble or EPE cushioning with offset and gravure printing up to 150 LPI, from a 3,000 m² ISO 9001 plant with 7–15 day lead times..
View sectorSend your bag specification, get a quote
Give us the format, dimensions, film structure and artwork. You will receive an indicative price, a stated lead time and a clear answer on whether we can hold the specification — no obligation, and no sales call unless you ask for one.