ESD and VCI Functional Film for Electronics and Metal Parts
Functional barrier film for ESD shielding and VCI rust prevention, with surface resistivity 10^6-10^11 ohm for electronics and metal parts. ISO 9001, REACH.
Functional film adds a protective property beyond basic containment, such as dissipating electrostatic charge or releasing a corrosion inhibitor inside a sealed package. PSF Packaging supplies ESD shielding film at a surface resistivity of 10⁶–10¹¹ Ω and VCI film for metal parts, built on multilayer coextrusion with 99.9%+ delivery pass rate and 7–15 day lead times.
When this process applies
This capability covers the functional film structures used in our ESD shielding bags and VCI rust preventive bags, including multilayer barrier and aluminium-foil options. Performance values such as inhibitor loading, attenuation and barrier structure are per customer specification and confirmed on sample approval. We do not apply functional additives to film structures that have not been agreed in writing.
Technical specifications
| ESD surface resistivity | 10⁶–10¹¹ Ω |
|---|---|
| VCI function | Volatile corrosion inhibitor for sealed metal-part packing |
| Barrier options | Multilayer moisture barrier; aluminium-foil structure |
| Layer structure | Per customer specification; confirmed on sample approval |
| Inhibitor loading | Per customer specification; confirmed on sample approval |
| Bag formats | Flat, zipper resealable, gusseted |
| Lead time | 7–15 days |
| Compliance | ISO 9001 (2019); EU REACH (2022); FDA 21 CFR 177.1520 |
Where it is the right choice
- ESD shielding bags for PCBs, semiconductors and electronics
- VCI bags for automotive and machinery parts
- Aluminium-foil barrier bags where moisture protection is required
- Export packaging that replaces rust-preventive oil
- Multilayer structures with performance locked at sample approval
Where it is the wrong choice
Stating this explicitly matters more than a capability list: if your requirement falls into one of these categories, a different structure or a different supplier is the right answer.
- Unsealed or open packing where a VCI inhibitor cannot build up
- Parts requiring certified cleanroom packaging beyond the agreed specification
- Applications needing attenuation or inhibitor values without an agreed test method
- Food-contact uses unless the food-grade structure is specified on sample approval
- Film structures with unapproved additive changes, which we do not substitute
Process setup
- In-house coextrusion of multilayer functional film
- ESD film controlled to 10⁶–10¹¹ Ω surface resistivity
- VCI masterbatch compounded during film blowing
- Barrier and aluminium-foil laminate structures
Process questions
What surface resistivity do your ESD films have?
Our ESD shielding film is supplied at a surface resistivity of 10⁶–10¹¹ Ω. The value is checked against the approved sample before release, because the electrostatic performance depends on the layer structure and on how the film is converted and handled.
How does VCI film protect metal parts without oil?
The film releases a volatile corrosion inhibitor into the sealed bag, where it forms a protective layer on metal surfaces. That removes the degreasing step before assembly. Inhibitor loading is per customer specification and confirmed on sample approval for the metal and transit conditions involved.
Can you combine ESD and moisture-barrier functions?
Yes. ESD and barrier layers can be built into one multilayer structure, including aluminium-foil options where moisture protection is critical. The layer stack and performance values are confirmed on sample approval, then held constant for repeat orders.
Related capabilities and products
Film Blowing
Film blowing extrudes polymer melt through an annular die, inflates it into a bubble and collapses the cooled tube into flat multilayer film. PSF Packaging blows PE, PP, CPE, PO and POF structures in-house, including five-layer coextruded POF with a shrink rate of at least 50%, and feeds an integrated printing, slitting and bag-converting line with 7–15 day lead times..
View capabilityQuality Inspection
Quality inspection in flexible packaging checks material, print, seals and functional performance against an approved sample before a lot is released. PSF Packaging inspects across the full process from film blowing to finished bags under ISO 9001 since 2019, with a 99.9%+ delivery pass rate and test values confirmed on sample approval..
View capabilityKnowledge Base
Selection guides, structure explanations and compliance mechanics written for packaging buyers.
Read articlesSend your bag specification, get a quote
Give us the format, dimensions, film structure and artwork. You will receive an indicative price, a stated lead time and a clear answer on whether we can hold the specification — no obligation, and no sales call unless you ask for one.