Full-Process Quality Inspection with 99.9%+ Delivery Pass Rate
Full-process inspection from film blowing to finished bags, with 99.9%+ delivery pass rate under ISO 9001 (2019), EU REACH (2022) and FDA 21 CFR 177.1520.
Quality inspection in flexible packaging checks material, print, seals and functional performance against an approved sample before a lot is released. PSF Packaging inspects across the full process from film blowing to finished bags under ISO 9001 since 2019, with a 99.9%+ delivery pass rate and test values confirmed on sample approval.
When this process applies
Inspection verifies conformance to the approved sample and the customer specification; it does not correct a specification that was never agreed. Gauge, size, print artwork, functional values and seal style are recorded at sample approval and used as the release criteria for repeat orders. Products that cannot be measured against an approved sample are not released from our line.
Technical specifications
| Quality system | ISO 9001, certified 2019 |
|---|---|
| Delivery pass rate | 99.9%+ |
| Chemical compliance | EU REACH (2022) |
| Food-contact compliance | FDA 21 CFR 177.1520 |
| Inspection stages | Film, printing, lamination, slitting, bag converting, final |
| Release criteria | Approved sample and customer specification |
| Functional checks | Surface resistivity 10⁶–10¹¹ Ω; shrink rate ≥50% where applicable |
| Documentation | Certification records and compliance statements available on request |
Where it is the right choice
- First-article and repeat-order checks against an approved sample
- Surface resistivity checks on ESD shielding bags
- Shrink-rate checks on five-layer POF film
- Print registration and seal integrity on converted bags
- Food-contact and REACH documentation for export customers
Where it is the wrong choice
Stating this explicitly matters more than a capability list: if your requirement falls into one of these categories, a different structure or a different supplier is the right answer.
- Certifying a product to a standard that was not agreed at sample approval
- Third-party laboratory testing that must be arranged by the customer
- Inspection of film or bags produced outside our integrated line
- Substituting a functional value without written customer approval
Process setup
- In-process checks at each of the six production stages
- Final lot inspection against the approved sample
- Surface resistivity verification for ESD film
- Shrink-rate verification for POF film
- ISO 9001 documented quality system since 2019
Process questions
What does your 99.9%+ delivery pass rate cover?
It is the pass rate of finished lots released against the approved sample and the customer specification across our integrated line. Lots that do not meet the specification are not shipped. The figure covers our own production from film blowing through printing, slitting, bag converting and final inspection.
Which certifications do you hold?
Our quality system is ISO 9001 certified since 2019, we achieved EU REACH compliance in 2022, and we supply food-contact material under FDA 21 CFR 177.1520. Compliance statements and certification records are available on request for your export documentation.
How do you check ESD and POF performance?
ESD film is checked against the 10⁶–10¹¹ Ω surface-resistivity range, and five-layer POF film against the 50% or higher shrink rate. Both are verified against the approved sample rather than a generic value, because the exact target depends on the customer specification.
Related capabilities and products
Film Blowing
Film blowing extrudes polymer melt through an annular die, inflates it into a bubble and collapses the cooled tube into flat multilayer film. PSF Packaging blows PE, PP, CPE, PO and POF structures in-house, including five-layer coextruded POF with a shrink rate of at least 50%, and feeds an integrated printing, slitting and bag-converting line with 7–15 day lead times..
View capabilityBag Converting & Sealing
Bag converting turns slit film into finished packages by forming seals, closures and openings on heat-sealing equipment. PSF Packaging converts flat bags, resealable zipper bags, gusseted bags and card-head bags with hang holes, in small-batch fast response or large-volume stable supply, with 7–15 day lead times and a 99.9%+ delivery pass rate..
View capabilityESD & VCI Functional Film
Functional film adds a protective property beyond basic containment, such as dissipating electrostatic charge or releasing a corrosion inhibitor inside a sealed package. PSF Packaging supplies ESD shielding film at a surface resistivity of 10⁶–10¹¹ Ω and VCI film for metal parts, built on multilayer coextrusion with 99.9%+ delivery pass rate and 7–15 day lead times..
View capabilityKnowledge Base
Selection guides, structure explanations and compliance mechanics written for packaging buyers.
Read articlesSend your bag specification, get a quote
Give us the format, dimensions, film structure and artwork. You will receive an indicative price, a stated lead time and a clear answer on whether we can hold the specification — no obligation, and no sales call unless you ask for one.