ESD Shielding and Moisture-Barrier Packaging for Electronics
ESD shielding bags with surface resistance 10⁶–10¹¹ Ω, plus moisture-barrier pouches for PCBs and semiconductors. ISO 9001 plant, 7–15 day lead times.
ESD shielding packaging is a static-dissipative barrier that protects electronic components from electrostatic discharge and moisture during storage and shipment. PSF Packaging supplies ESD shielding bags with surface resistance of 10⁶–10¹¹ Ω, moisture-barrier and anti-oxidation pouches for PCBs and semiconductors, from a 3,000 m² ISO 9001 plant with 7–15 day lead times.
Scope of supply in this sector
We supply ESD shielding bags, moisture-barrier and anti-oxidation pouches for PCBs, ICs and semiconductor components. We do not manufacture the electronic parts, run ESD-control audits at your facility, or provide cleanroom packaging services — our role is the film and bag converter. Buyers needing certified dry-baking or vacuum-barrier systems should specify that separately; we will state clearly if a requirement sits outside our process.
Requirements
| Surface resistance | 10⁶–10¹¹ Ω |
|---|---|
| Barrier function | Moisture and oxidation protection |
| Bag formats | ESD shielding, moisture-barrier, anti-oxidation |
| Quality system | ISO 9001 (certified 2019) |
| Materials compliance | EU REACH compliant (2022) |
| Standard lead time | 7–15 days |
| Passed inspection rate | 99.9%+ |
Materials we supply for this sector
- ESD shielding film, surface resistance 10⁶–10¹¹ Ω
- Moisture-barrier laminates and aluminium foil structures
- PE / CPE / PO co-extruded films
- Anti-static and anti-oxidation additive films
Applicable standards
- ISO 9001 (certified 2019)
- EU REACH compliant (2022)
- Surface-resistance specification: 10⁶–10¹¹ Ω for ESD shielding bags
- FDA 21 CFR 177.1520 applies to food-contact grades only, not to ESD bags
Typical bag formats and applications
- PCB and PCBA shielding bags
- IC and semiconductor component pouches
- Moisture-barrier bags for reflow-sensitive boards
- Anti-oxidation pouches for bare copper and solder surfaces
Quality risks specific to this sector
These are the failure modes we see most often in this sector. They are listed because knowing them before sample approval is cheaper than discovering them at your incoming check.
- Electrostatic discharge: a bag outside the 10⁶–10¹¹ Ω surface-resistance range cannot dissipate charge safely and can damage sensitive junctions.
- Reflow popcorning: PCBs that absorb moisture can delaminate or crack during reflow; the bag must be sealed and the boards dry before packing.
- Oxidation of solder pads and bare copper in storage raises contact resistance and reduces solderability.
- Thin or poorly sealed bags puncture on sharp board edges, breaking the electrostatic and moisture barrier in transit.
Compliance and capability questions
What surface resistance should an ESD shielding bag have?
A dissipative ESD shielding bag is specified at a surface resistance of 10⁶–10¹¹ Ω. Below that range charge drains too quickly and can spark; above it, charge accumulates. PSF bags are supplied to this specification with a 7–15 day standard lead time.
Do ESD bags also protect PCBs from moisture before reflow?
Not by themselves. ESD shielding controls static; moisture protection needs a separate barrier layer and a sealed closure. For moisture-sensitive boards, specify a combined ESD and moisture-barrier pouch, and make sure the boards are dry before packing.
Can I order custom-sized ESD bags in small batches?
Yes. Sizes, printing and shape are developed to your drawing. Standard lead time is 7–15 days and our passed-inspection rate is 99.9%+. Send dimensions and use conditions for an exact quote.
Industries we also supply
Automotive & Mechanical Parts
VCI rust-preventive packaging releases vapour-phase corrosion inhibitors from the film to protect bare metal surfaces without coating parts in oil. PSF Packaging supplies VCI bags that replace traditional rust-preventive oil for automotive and mechanical parts, from a 3,000 m² ISO 9001 plant with 7–15 day lead times and a 99.9%+ passed-inspection rate..
View sectorFood & Beverage
Food-grade flexible packaging must meet migration limits for direct food contact and run cleanly on high-speed filling lines. PSF Packaging supplies PE, PP and mPE bags compliant with FDA 21 CFR 177.1520 and five-layer co-extruded POF shrink film with a shrink rate of ≥50% for high-speed lines, from a 3,000 m² plant with 7–15 day lead times..
View sectorE-commerce, Retail & Jewellery
E-commerce and retail packaging balances shelf presentation with transit protection across many SKUs. PSF Packaging supplies custom printed bags, self-seal zipper pouches, OPP card-header bags and bubble or EPE cushioning with offset and gravure printing up to 150 LPI, from a 3,000 m² ISO 9001 plant with 7–15 day lead times..
View sectorSend your bag specification, get a quote
Give us the format, dimensions, film structure and artwork. You will receive an indicative price, a stated lead time and a clear answer on whether we can hold the specification — no obligation, and no sales call unless you ask for one.