Printed, Zipper and Protective Bags for E-commerce and Retail
Custom printed bags, zipper pouches, OPP header bags and bubble/EPE cushioning for retail. Up to 150 LPI print, 7–15 day lead times, ISO 9001 plant.
E-commerce and retail packaging balances shelf presentation with transit protection across many SKUs. PSF Packaging supplies custom printed bags, self-seal zipper pouches, OPP card-header bags and bubble or EPE cushioning with offset and gravure printing up to 150 LPI, from a 3,000 m² ISO 9001 plant with 7–15 day lead times.
Scope of supply in this sector
We supply printed retail bags, zipper pouches, OPP header bags, bubble and EPE cushioning, aluminium-foil and PLA biodegradable bags. We are a converter, not a fulfilment house: we do not pack orders or store inventory. MOQ is driven by plate and cylinder setup per SKU, so a large SKU count with small runs costs more; consolidate artwork where possible.
Requirements
| Print resolution | Up to 150 LPI, offset and gravure |
|---|---|
| Formats | Printed bags, zipper, OPP header, bubble, EPE |
| Closure | Self-seal and zipper options |
| Quality system | ISO 9001 (certified 2019) |
| Materials compliance | EU REACH (2022); FDA 21 CFR 177.1520 for food-contact SKUs |
| Standard lead time | 7–15 days |
Materials we supply for this sector
- OPP / PP / CPE / PE films
- Bubble film and EPE laminated cushioning
- Aluminium foil bags
- PLA biodegradable film
- Printed laminates up to 150 LPI
Applicable standards
- ISO 9001 (certified 2019)
- EU REACH compliant (2022)
- FDA 21 CFR 177.1520 for food-contact SKUs only
- Offset and gravure printing up to 150 LPI
Typical bag formats and applications
- Printed retail carrier and mailer bags
- Self-seal zipper pouches
- OPP card-header bags for hanging display
- Bubble and EPE cushioned mailers
- Jewellery and small-item pouches
Quality risks specific to this sector
These are the failure modes we see most often in this sector. They are listed because knowing them before sample approval is cheaper than discovering them at your incoming check.
- Ink rub-off: insufficient cure or the wrong ink for the substrate causes graphics to scuff during transit; 150 LPI print must be cured and rub-tested before converting.
- Transit damage: inadequate bubble or EPE cushioning lets jewellery and small rigid items shift and break.
- SKU proliferation: each printed SKU needs its own plate or cylinder, so many low-volume SKUs raise MOQ and unit cost.
- Zipper failure: poor track alignment causes self-seal strips to misalign or leak after repeated opening.
Compliance and capability questions
What is the minimum order quantity for printed bags?
MOQ depends on the plate or cylinder needed for each SKU, not on a single fixed number. More SKUs with small runs raise cost. Send your SKU count, sizes and artwork and we will quote against the actual setup rather than a generic minimum.
Can you print small runs for many SKUs?
We can, but per-SKU plate setup makes it costly. A shared design across sizes, or fewer colours, reduces it. Standard lead time is 7–15 days and our passed-inspection rate is 99.9%+.
Which bag best protects jewellery in the post?
A printed mailer with bubble or EPE cushioning plus an inner zipper pouch. The outer bag carries the print, the cushioning absorbs impact, and the zipper keeps small items separate. Send dimensions and weight for a recommendation.
Industries we also supply
Electronics & Semiconductor
ESD shielding packaging is a static-dissipative barrier that protects electronic components from electrostatic discharge and moisture during storage and shipment. PSF Packaging supplies ESD shielding bags with surface resistance of 10⁶–10¹¹ Ω, moisture-barrier and anti-oxidation pouches for PCBs and semiconductors, from a 3,000 m² ISO 9001 plant with 7–15 day lead times..
View sectorAutomotive & Mechanical Parts
VCI rust-preventive packaging releases vapour-phase corrosion inhibitors from the film to protect bare metal surfaces without coating parts in oil. PSF Packaging supplies VCI bags that replace traditional rust-preventive oil for automotive and mechanical parts, from a 3,000 m² ISO 9001 plant with 7–15 day lead times and a 99.9%+ passed-inspection rate..
View sectorFood & Beverage
Food-grade flexible packaging must meet migration limits for direct food contact and run cleanly on high-speed filling lines. PSF Packaging supplies PE, PP and mPE bags compliant with FDA 21 CFR 177.1520 and five-layer co-extruded POF shrink film with a shrink rate of ≥50% for high-speed lines, from a 3,000 m² plant with 7–15 day lead times..
View sectorSend your bag specification, get a quote
Give us the format, dimensions, film structure and artwork. You will receive an indicative price, a stated lead time and a clear answer on whether we can hold the specification — no obligation, and no sales call unless you ask for one.