Consumer electronics · Not disclosed

CPE Inner Bags and Protective Film for 3C Product Packaging

How PSF supplies CPE inner bags and protective film for 3C product packaging, printed up to 150 LPI with a 99.9%+ passed-inspection rate.

Matte CPE bags holding a remote control, calculator and power strip
Matte CPE bags holding a remote control, calculator and power strip.
Result in one paragraph

Consumer electronics need inner bags that protect glossy surfaces from scratches and static without slowing the pack line. PSF Packaging supplies CPE inner bags and protective film for 3C product packaging, printed up to 150 LPI and checked to a 99.9%+ passed-inspection rate, with 7–15 day lead times.

The starting condition

3C products such as phones and tablets leave the line with glossy housings and exposed connectors that scratch or attract dust easily. The inner bag must protect the surface, manage static, and run through semi-automatic packing without jamming. PSF's company profile records CPE inner bags and protective film supplied for this category; it does not disclose a pre-supplier reject rate, so no defect-reduction percentage is claimed here.

Constraints

Product category3C consumer electronics inner packaging
Supplied itemsCPE inner bags and protective film
Print capabilityOffset and gravure up to 150 LPI
Passed inspection rate99.9%+ (plant-wide)
Standard lead time7–15 days
Commercial dataNot disclosed

Measured results

Supplied product scope
Not disclosed CPE inner bags and protective film for 3C products
Recorded in PSF company profile; no prior supplier or format disclosed.
Passed inspection rate
Not disclosed 99.9%+
PSF plant-wide figure, not a Samsung-specific measurement.
Standard lead time
Not disclosed 7–15 days
PSF standard lead time; customer-specific schedule not disclosed.
Print resolution
Not disclosed Up to 150 LPI
PSF offset and gravure capability, not a claim about this programme artwork.

What we changed, and why

  1. Film blowing and bag converting in one plant PSF blows CPE/PE film and converts bags on site, so the inner bag and the protective film come from one controlled process chain rather than being matched across two suppliers.
  2. Surface protection specified with the product The film is specified against the housing finish and the packing method. Glossy surfaces need a low-scratch inner layer; the requirement is agreed from samples before production starts.
  3. Print only where branding is needed Offset and gravure printing runs up to 150 LPI. Artwork is checked for cure and rub resistance before converting, so graphics do not scuff during transit.
  4. Inspect before shipment Bags are checked against the agreed dimensions and print before shipment, to the plant-wide passed-inspection rate of 99.9%+.

“For 3C inner bags the film has to run cleanly on the line and protect a glossy surface without leaving marks. That is why we keep film blowing and bag converting in one plant.”

PSF process engineer, Internal statement — not a customer quote — Samsung Electronics

Where this approach stops working

The customer name is published with permission, but order volumes, defect rates, pricing and delivery schedules are not public and are not stated here. This case describes the product category recorded in PSF's company profile; it is not a quantified improvement claim. The photograph is representative PSF production, not the exact customer product.

Photographs

Representative PSF production

Send your bag specification, get a quote

Give us the format, dimensions, film structure and artwork. You will receive an indicative price, a stated lead time and a clear answer on whether we can hold the specification — no obligation, and no sales call unless you ask for one.

Chat on WhatsApp