Industrial electronics · Not disclosed

ESD Moisture-Barrier Bags with JIT Delivery and Lightweighting

PSF supplies industrial ESD anti-static moisture-barrier bags with JIT delivery, 10⁶–10¹¹ Ω surface resistance and lightweighting to cut logistics cost.

Stacks of green and silver ESD moisture-barrier shielding bags resting on bubble film
Finished green and silver ESD moisture-barrier shielding bags resting on bubble film.
Result in one paragraph

Industrial electronics need ESD bags that also block moisture and arrive on a just-in-time schedule. PSF Packaging supplies industrial-grade anti-static moisture-barrier bags with surface resistance of 10⁶–10¹¹ Ω on a JIT delivery model, lightweighted to lower warehousing and logistics cost, backed by a 99.9%+ passed-inspection rate.

The starting condition

Industrial electronics components are static-sensitive and moisture-sensitive at the same time, so a plain anti-static bag is not enough. The customer also needed just-in-time delivery to avoid holding stock and lighter packaging to reduce storage and freight cost. PSF's company profile records ESD anti-static moisture-barrier bags, JIT delivery and lightweighting for this account; it discloses no defect-rate or cost-reduction percentage.

Constraints

Bag typeESD anti-static moisture-barrier
Surface resistance10⁶–10¹¹ Ω
DeliveryJIT (just-in-time)
Cost leverLightweighting to reduce warehousing and logistics cost
Passed inspection rate99.9%+ (plant-wide)
Cost and volume dataNot disclosed

Measured results

Surface resistance
Not disclosed 10⁶–10¹¹ Ω
PSF ESD bag specification from company profile.
Delivery model
Not disclosed JIT (just-in-time)
Recorded in PSF company profile; no inventory-reduction percentage disclosed.
Warehousing and logistics cost
Not disclosed Reduced through lightweighting
Qualitative statement from company profile; no percentage disclosed.
Passed inspection rate
Not disclosed 99.9%+
PSF plant-wide figure, not customer-specific.

What we changed, and why

  1. Combined ESD and moisture barrier The bag combines a dissipative layer at 10⁶–10¹¹ Ω surface resistance with a moisture-barrier structure, so static control and humidity protection come in one pouch.
  2. JIT release schedule Deliveries are released against consumption rather than held in a large buffer. PSF standard lead time is 7–15 days, and the JIT schedule is set with the customer planning team.
  3. Lightweighting without losing protection Film gauge and structure are reviewed to remove excess material while keeping the surface-resistance and barrier specifications. Any change is qualified against samples before it enters the JIT stream.

“The dissipative layer and the moisture barrier have to work in the same film. If either one is treated as an afterthought, the bag fails at the customer even when it passes our incoming check.”

PSF packaging engineer, Internal statement — not a customer quote — Huawei

Where this approach stops working

The customer name is published with permission. JIT call-off quantities, cost savings, inventory levels and any before/after defect data are not public and are not claimed. Lightweighting is qualified per part number; it is not a blanket reduction applied to every ESD bag we make.

Photographs

Representative PSF production

Send your bag specification, get a quote

Give us the format, dimensions, film structure and artwork. You will receive an indicative price, a stated lead time and a clear answer on whether we can hold the specification — no obligation, and no sales call unless you ask for one.

Chat on WhatsApp